Type
Showing all 24 results
-
Quick ViewAGUA – H2O
AGUA – H2O
H2O, teardrop luminaire for laminar flow cleanroom.
Body in aluminium, teardrop chaped diffuser in polycarbonate.
White light version or inactinic light. -
Quick View
B5
B5
Recessed cleanroom luminaires, IP65, UV-C radiation emission for surface and air disinfection. Access from below. Body made of heavy gauge steel sheet, white polyester powder coating.
-
Quick View
BATDX
BATDX
Recessed compact waterproof led luminaires for cleanroom, polycarbonate or pmma diffusers. Access from the top and the front.
Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered steel clamping frame. Bright red lacquered hood
Range tested by Fraunhofer IPO lab. -
Quick View
DRACO
DRACO
Compact recessed luminaires for cleanrooms, access from below, IP65, with intensive, semi-extensive or extensive photometric distributions. Diffusers in polycarbonate or pmma.
Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered aluminum frame secured by safety clip. -
Quick View
DRACO Ex-D
DRACO Ex-D
Recessed and compact cleanroom luminaire with LED modules, IP65, access from below, suitable for use in areas where an explosive atmosphere due to dust is unlikely and for a short time.
ATEX classification : II 3D Ex tc IIIC T85°C De. -
Quick View
FEL_B
FEL_B
Floodlight Explosion-proof LED modules for explosive atmospheres II 2 G Ex d IIB T5 Gb et II2D Ex tb IIIC 95ºMax Db IP66, according directive 2014/34/EU, zones 1, 21 et 2,22.
-
Quick View
FEL_G
FEL_G
Explosion-proof, linear, compact luminaire with LED modules for explosive environments II 2 G Ex db eb mb IIC T6 Gb, according to directive 2014/34/EU, zones 1, 21.
-
Quick View
H1_E
H1_E
Ultra-thin (11 mm) LED tiles, specially designed for cleanroom applications, smooth profile. IP65 top and bottom, resistant to hydrogen peroxide, flush-mounted on underside for seamless installation. Wide range of fl uxes, from 1500 to 5150 Lm. Available in 4000 K or 6500 K.
-
Quick View
H1_EVO
H1_EVO
Ultra-thin (11 mm) LED tiles, specially designed for cleanroom applications, with smooth, rounded profile and no sharp edges. IP65 on top and bottom, resistant to hydrogen peroxide, flush-mounted on underside for seamless installation. Wide range of fl uxes, from 1800 to 6500 Lm. Available in 4000 K or 6500 K. CRI over 90 and R9 (red) over 50.
-
Quick ViewH1_EVO_WR
H1_EVO_WR
Combined 4000 K white and 630 nm red led panel. Waterproof IP65 for cleanroom, very thin (11mm), specially designed for application in cleanrooms. IP65 from the top and bottom, resistant to hydrogen peroxide, plated on the underside to make a joint. Wide flux range, from 1500 to 8000 Lm.
The optical assembly consists of a reflective sheet incorporating Toray’s Lumirror technology, a Mitsubishi PMMA light guide and a Chimei white polystyrene diffusing film. -
Quick View
H2O_LC
H2O_LC
LED surface-mounted lighting with aerodynamic section, for installation in cleanroom when the air flow must be laminar. Available in white light or inactinic amber 590 nm.
-
Quick View
IDA
IDA
Low glare IP40 LED panel, low thickness for flush mounting, protrusion or suspension.
Optical unit illuminated by the wafer, the materials used ensure an optimum efficiency of the luminaire, up to 96Lm / W.
MP version equipped with a micro-prisms plate for a better visual comfort, UGR lower than 19.
Products designed in France and manufactured in Europe, multi-power electronic power supply of Osram brand or equivalent. -
Quick View
IR77_EVO
IR77_EVO
LED recessed cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from below.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 4 stainless steel clamping screws. -
Quick View
Ir77-HLED
Ir77-HLED
Recessed LED cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from the top.
Body in thick sheet steel, white lacquered by polyester powder coating. Top clamping frame in bright red painted steel for better viewing. -
Quick View
Li3
Li3
Recessed luminaires for cleanrooms, IP65, UV-C radiation for surface and air disinfection. Access from above.
Housing made of thick sheet steel, white polyester powder-coated. -
Quick View
Luna
Luna
Circular LED recessed cleanroom lighting fitting, IP65, with opal diffuser PMMA. Upper access.
Body in thick sheet steel, white lacquered by polyester powder coating. -
Quick View
MARS
MARS
Recessed cleanroom luminaires with top access, compact, IP65, LED, with intensive or extensive, polycarbonate or pmma diffusers. Wide range of photometric powers and distributions. Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered steel clamping frame.
-
Quick View
MARS Ex-e D
MARS Ex-e D
Recessed and compact cleanroom luminaire with LED modules, IP65, access from the top, suitable for use in areas where an explosive atmosphere due to dust is unlikely and for a short time.
ATEX classification : II 3D Ex tc IIIC T85°C De. -
Quick View
Mg12
Mg12
Recessed led cleanroom luminaire. Mounting on sandwich panel with cut-out. Once mounted, the luminaire is flush above and below the ceiling and its cover is walkable. The standard version allow access to the equipment from above. In the HB Version, access is possible from above and below.
-
Quick View
ND60_U
ND60_U
Clean room luminaire for T55 modular ceilings, access from above. The box of this luminaire is integrated by gravity onto the ceiling profiles. A bottom opening version (D) is also available.
-
Quick View
ND60-D
ND60-D
Cleanroom luminaire for T55 modular ceilings, access from below. The housing of this luminaire is gravity-fitted to the ceiling profiles. A upside opening version (U) is also available.
-
Quick View
SIRIUS
SIRIUS
SIRIUS, surface cleanroom led lighting fitting. Low profile Inverted pyramidal body to reduce particle accumulation.
Low profile 38mm, built-in power supply. -
Quick View
SM62
SM62
LED recessed cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from below for mounting in clip-in modular false-ceiling.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 4 stainless steel clamping screws. -
Quick View
XE54-LED
XE54-LED
Xe54-LED LED recessed luminaire for operating theater, IP65, with low luminance diffuser in polycarbonate, color rendering index higher than 90, very high luminous flux, dimmable power supply.
This range of products allows to illuminate the blocks according to the norms of EN12464.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 8 stainless steel clamping screws.
